2 Nov
2020
2 Nov
'20
4:16 p.m.
Hi All,
I'm working on restoring a DEC PDP-11/23+ for the University of Colorado computer
museum and I'm struggling to find a few parts, working or not, needed to complete the
system. Please let me know if you have any of these items and would be willing to donate
or sell them.
You can see a blog I'm keeping of the restoration
at?https://headspinlabs.wordpress.com/dec-pdp-11
When finished, it will be on display at?https://mediaarchaeologylab.com/visit
Thanks,
Steve
8 Nov
8 Nov
11:18 a.m.
On 2020-11-02 19:16, Stephen Buck via cctalk wrote:
Hi All,
I'm working on restoring a DEC PDP-11/23+ for the University of Colorado
computer museum and I'm struggling to find a few parts, working or not,
needed to complete the system. Please let me know if you have any of
these items and would be willing to donate or sell them.
What are you looking for exactly?
Looking at your blog, you are pretty far, having a nice machine there
already...
Cheers
9 Nov
9 Nov
12:22 a.m.
I believe he's just looking for a BA23 rackmount faceplate, an RL02
drive and a 3U blanking plate for those half-height PDP-11 cabinets
What are you looking for exactly?
Looking at your blog, you are pretty far, having a nice machine there
already...
Cheers
8:44 p.m.
On Mon, Nov 9, 2020 at 3:22 AM rice43 via cctalk <cctalk at classiccmp.org> wrote:
I believe he's just looking for a BA23 rackmount
faceplate, an RL02
drive and a 3U blanking plate for those half-height PDP-11 cabinets
The 5.25"-tall blank plate for the H9642 cabs is the H9504-SC, FWIW
(not that it's a commonly-known name - I had to look it up in a
brochure)
From reading the Blog, I think a BA11 might also be on
the list, to
swap in for the BA23 to get it back to its original 1981 look (his
BA23 is fully functional, but newer).
-ethan
10 Nov
10 Nov
1:24 p.m.
On Mon, Nov 9, 2020 at 9:44 PM Ethan Dicks via cctalk <cctalk at classiccmp.org>
wrote:
On Mon, Nov 9, 2020 at 3:22 AM rice43 via cctalk
<cctalk at classiccmp.org>
wrote:
So 1984 or 1985 edition, instead of the 1981 edition?
Though I'm personally biased for the BA23 version after managing a MicroVAX
II / VAXstation II for 3 years in college, the BA11 faceplate is a little
cooler.
Warner
Warner
I believe he's just looking for a BA23
rackmount faceplate, an RL02
drive and a 3U blanking plate for those half-height PDP-11 cabinets
The 5.25"-tall blank plate for the H9642 cabs is the H9504-SC, FWIW
(not that it's a commonly-known name - I had to look it up in a
brochure)
From reading the Blog, I think a BA11 might also be on the list, to
swap in for the BA23 to get it back to its original 1981 look (his
BA23 is fully functional, but newer).
1503
days inactive
1510
days old
4 comments
5 participants
participants (5)
-
emu＠e-bbes.com -
ethan.dicks＠gmail.com -
imp＠bsdimp.com -
rice43＠btinternet.com -
stephenbuck＠mac.com