13 Jul
2016
13 Jul
'16
10:15 p.m.
Greetings
The DEC RRD40 CD-ROM drive requires a DEC caddy to insert and remove CD?s from the drive.
Does anyone have a spare caddy they could sell/post to me?
Details of caddy in this document link below, however if you don?t know what it is you are
probably unlikely to have one.
http://www.carelife.com/manuals/RDD40_Optical_Drive_Owner_Manual.PDF
<http://www.carelife.com/manuals/RDD40_Optical_Drive_Owner_Manual.PDF>
Many thanks
Brendan
--------------//----------------
brendan at mcneill.co.nz
+64 21 881 883
14 Jul
14 Jul
2:24 p.m.
Greetings
The DEC RRD40 CD-ROM drive requires a DEC caddy to insert and remove CD's from
the drive. Does anyone have a spare caddy they could sell/post to me?
Hi Brendan,
I have a few but where I am is just about the furthest anyone can get from New
Zealand without leaving the planet. Let me know if you don't find any closer
to you.
Regards,
Peter Coghlan.
15 Jul
15 Jul
10 a.m.
Are the caddys specific to that drive or pretty standard? I picked up a
stack of caddys recently, if you can get me a reference picture i can see
if any of them are the same.
--Devin
On Thu, Jul 14, 2016 at 5:24 PM, Peter Coghlan <cctalk at beyondthepale.ie>
wrote:
Greetings
The DEC RRD40 CD-ROM drive requires a DEC caddy to insert and remove
CD's
from
the drive. Does anyone have a spare caddy they
could sell/post to me?
Hi Brendan,
I have a few but where I am is just about the furthest anyone can get from
New
Zealand without leaving the planet. Let me know if you don't find any
closer
to you.
Regards,
Peter Coghlan.
10:08 a.m.
On Jul 15, 2016 10:01 AM, "devin davison" <lyokoboy0 at gmail.com> wrote:
Are the caddys specific to that drive or pretty standard? I picked up a
stack of caddys recently, if you can get me a reference picture i can see
if any of them are the same.
--Devin
They are specific to that drive, which is a* Laser Magnetic Storage
International* (LMSI) / Philips CM201 drive.
7:30 p.m.
On Fri, Jul 15, 2016 at 12:08 PM, Glen Slick <glen.slick at gmail.com> wrote:
They are specific to that drive, which is a* Laser
Magnetic Storage
International* (LMSI) / Philips CM201 drive.
I can't imagine there are many of these caddy/tools left on the
planet. I have exactly one.
Sounds like a good project for someone with a 3D printer and CAD
skills (not me on both counts.)
3081
days inactive
3083
days old
4 comments
5 participants
participants (5)
-
brendan＠mcneill.co.nz -
cctalk＠beyondthepale.ie -
glen.slick＠gmail.com -
lyokoboy0＠gmail.com -
silent700＠gmail.com