23 Mar
2001
23 Mar
'01
11:43 a.m.
From: Ethan Dicks <ethan_dicks(a)yahoo.com>
> > There is out there a TU-58 emulator for
PeeCee...
There is one that runs under UNIX.
Also the rollers for the TU58 I clean off the goo to get down to the
basic hub then use .500 od/.375 id Tygon tubing. which is a stretch
fit over the hub, add a drop of super glue and trim to width as
diameter is not critical and that material seems to hit it very close.
I've done this to maybe 8 them I still use.
Allison
23 Mar
23 Mar
3:12 p.m.
On Fri, 23 Mar 2001, ajp166 wrote:
From: Ethan Dicks <ethan_dicks(a)yahoo.com>
I've written one for DOS that needs some tweaking still... I'll cut
loose the source code if someone wants to fix it up. Basically, it
sometimes gets out of sync and you have to power down the 750 and
restart the PC to get it back working...
> > There is out there a TU-58 emulator for
PeeCee...
There is one that runs under UNIX.
Also the rollers for the TU58 I clean off the goo to
get down to the
basic hub then use .500 od/.375 id Tygon tubing. which is a stretch
fit over the hub, add a drop of super glue and trim to width as
diameter is not critical and that material seems to hit it very close.
I've done this to maybe 8 them I still use.
Allison
THANKS Allison! I bought two from Keyways, Inc. for $40 + shipping...
For that price, I could have bought 20' of Tygon tubing... Live and
learn...
clint
7 Jul
7 Jul
11:43 a.m.
Repost of message for Ethan...
On Fri, 23 Mar 2001, ajp166 wrote:
From: Ethan Dicks <ethan_dicks(a)yahoo.com>
> > There is out there a TU-58 emulator for
PeeCee...
There is one that runs under UNIX.
Also the rollers for the TU58 I clean off the goo to get down to the
basic hub then use .500 od/.375 id Tygon tubing. which is a stretch
fit over the hub, add a drop of super glue and trim to width as
diameter is not critical and that material seems to hit it very close.
I've done this to maybe 8 them I still use.
Allison
8 Jul
8 Jul
3:29 p.m.
--- "Clint Wolff (VAX collector)" <vaxman(a)qwest.net> wrote:
Repost of message for Ethan...
Thanks! Replacements in place. All I need now is a pinout of the power
harness - I'm assuming that black is GND, red is +5 and orange is +12, but
I'm going to verify it before I apply power.
Oh... that and some slurping software for DOS or UNIX.
-ethan
=====
Visit "The Seventh Continent"
http://penguincentral.com/penguincentral.html
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
8519
days inactive
8626
days old
3 comments
3 participants
participants (3)
-
ajp166＠bellatlantic.net -
ethan_dicks＠yahoo.com -
vaxman＠qwest.net