23 Mar
2001
23 Mar
'01
11:43 a.m.
From: Ethan Dicks <ethan_dicks(a)yahoo.com>
> > There is out there a TU-58 emulator for
PeeCee...
There is one that runs under UNIX.
Also the rollers for the TU58 I clean off the goo to get down to the
basic hub then use .500 od/.375 id Tygon tubing. which is a stretch
fit over the hub, add a drop of super glue and trim to width as
diameter is not critical and that material seems to hit it very close.
I've done this to maybe 8 them I still use.
Allison