I know, I got the docu from a webpage, but I only have a terminator.
It misses the jumber board in order to continue the bus on the 2nd half.
On Sat, September 30, 2006 1:28 pm, Ed Groenenberg said:
I got a BA-356 with 6 drives ad it came with a dual channel
I want to use it as a single channel tray, and according to
the user guide it needs a jumper connector.
The BA356 has its jumper and terminator already installed behind the
blowers, though that it has a dual channel personality module doesn't
necessarily mean the shelf is a split-bus one. If you've powered it up and
it's spun up drives 0, 2, 4 then 1,3,5 etc you just need to swap the
terminator and jumper boards. Remove the blowers on the back and the
jumper cover at the bottom (metal box, it's a pig to remove :o)) then swap
the boards over.
If I was thinking straight I could tell you how to check which board is
connected where by removing the drives and looking at the backplane, maybe
someone else will do that for me :)
Binary Dinosaurs creator/curator
- the UKs biggest home computer collection?