I remember some laptop that had a special key combination to switch from LCD
to external monitor. You could not have both at the same time. Look for
extra feature keys (usually accessed by pressing a special FN key).
Francois
-------------------------------------------------------------
Visit the desperately in need of update
Sanctuary at:
http://www.pclink.com/fauradon
-----Original Message-----
From: Shawn Rutledge <ecloud(a)goodnet.com>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Wednesday, September 02, 1998 7:00 PM
Subject: Re: LCD woes
Anyway, the
machine has a special card in it for driving the LCD panel.
It is labeled "LCD & HGC CARD". What is "HGC"? It has an
external 9-pin
Probably "Hercules Graphics Card" - Hercules made the original
mono graphics card that was cloned a lot and most cards for driving
mono monitors are that variety. It gives you 720 x 4?? dots
with each pixel being on or off. As well as being compatible
with the original IBM PC mono video card (which had only text mode).
It does use a 9-pin connector.
> port on it and I tried plugging the monochrome display into it, but the
> picture was all distorted so I figured it was using a different frequency
> or something. The cursor comes out about an inch wide, and none of the
> craracters are recognizable, possibly just from overwritten numerous
times
in the same
scanline.
Hmmm are you sure the monitor is OK?
Oh, and BTW, I electrocuted myself last night when I touched some exposed
wiring going to the LCD panel. It surprised me that there was that much
Is it backlit? Fluorescent backlights use relatively high voltage.
--
_______ KB7PWD @ KC7Y.AZ.US.NOAM
ecloud(a)goodnet.com
(_ | |_) Shawn T. Rutledge on the web:
http://www.goodnet.com/~ecloud
__) | |
\__________________________________________________________________
* X window * virtual reality * knowledge base * ham
radio * electronics *