inexpensive prototype boards with 22-44 pin edge connector - test-drb@ccmp.vtda.org

4 Jan 2008

Sandy's Electronics here in Reno has a bunch $1.00 each, these are the
vellman boards and some telecom boards.  20 slot backplanes to match too.
www.sandyselectronicparts.com
Randy

...
  From: mcguire at neurotica.com
<http://www.classiccmp.org/mailman/listinfo/cctalk> 
...
  Date: Fri, 4 Jan 2008 10:44:20 -0500
 To: cctech at classiccmp.org
<http://www.classiccmp.org/mailman/listinfo/cctalk> 
...
  CC: 
 Subject: Re: inexpensive prototype boards with 22/44 pin edge connector

 On Jan 4, 2008, at 6:51 AM, Roy J. Tellason wrote:
   Does
anyone know where to get some inexpensive prototype boards with 
 the
 22/44 pin edge connectors?

 I am looking for something like DATAK or VELLEMAN boards preferably 
 under
 $10 a piece.

 I have looked but have not been able to find any.  Any hints would be 
 much
 appreciated. 
 I too would be interested in these.   They used to be really common,  
 and
 could even be found at radio shack for a while,  but not these days...

 Small prototyping boards in general are of interest to me,  with or 
 without
 the edge connector for that matter.  
    Same here; if anyone finds a good source for decent prototyping 
 boards, please post it.

             -Dave

 --
 Dave McGuire
 Port Charlotte, FL

-----REPLY-----

Thanks Randy!

Andrew Lynch