4 Jan
2008
4 Jan
'08
11:46 a.m.
Sandy's Electronics here in Reno has a bunch $1.00 each, these are the
vellman boards and some telecom boards. 20 slot backplanes to match too.
www.sandyselectronicparts.com
Randy
From: mcguire at neurotica.com
<http://www.classiccmp.org/mailman/listinfo/cctalk>
Date: Fri, 4 Jan 2008 10:44:20 -0500
To: cctech at classiccmp.org
<http://www.classiccmp.org/mailman/listinfo/cctalk>
CC:
Subject: Re: inexpensive prototype boards with 22/44 pin edge connector
On Jan 4, 2008, at 6:51 AM, Roy J. Tellason wrote:
Same here; if anyone finds a good source for decent prototyping
boards, please post it.
-Dave
--
Dave McGuire
Port Charlotte, FL
-----REPLY-----
Thanks Randy!
Andrew Lynch
Does
anyone know where to get some inexpensive prototype boards with
the
22/44 pin edge connectors?
I am looking for something like DATAK or VELLEMAN boards preferably
under
$10 a piece.
I have looked but have not been able to find any. Any hints would be
much
appreciated.
I too would be interested in these. They used to be really common,
and
could even be found at radio shack for a while, but not these days...
Small prototyping boards in general are of interest to me, with or
without
the edge connector for that matter.