30 May
2010
30 May
'10
9:22 a.m.
Available for one who wants it, a Dec H960 rack.
No sidepanels, nor a masthead.
Note, the rack is in the Netherlands.
Will go to the scrappers at the end of June.
--
Dit is een HTML vrije email / This is an HTML free email.
30 May
30 May
10:57 a.m.
Hello.
I was searching for one rack for my PDP equipment from years ago. What
dimensions has this one ?
Regards
Sergio
2010/5/30 E. Groenenberg <quapla at xs4all.nl>
Available for one who wants it, a Dec H960 rack.
No sidepanels, nor a masthead.
Note, the rack is in the Netherlands.
Will go to the scrappers at the end of June.
--
Dit is een HTML vrije email / This is an HTML free email.
11:28 a.m.
Hello Sergio,
It is a standard high cabinet from DEC, i.e. 60cm wide, 180 cm high,
approx 70 cm deep.
Regards,
Ed
Hello.
I was searching for one rack for my PDP equipment from years ago. What
dimensions has this one ?
Regards
Sergio
2010/5/30 E. Groenenberg <quapla at xs4all.nl>
--
Dit is een HTML vrije email / This is an HTML free email.
Available for one who wants it, a Dec H960 rack.
No sidepanels, nor a masthead.
Note, the rack is in the Netherlands.
Will go to the scrappers at the end of June.
--
Dit is een HTML vrije email / This is an HTML free email.
11:58 a.m.
Thanks, Ed.
Sergio
2010/5/30 E. Groenenberg <quapla at xs4all.nl>
Hello Sergio,
It is a standard high cabinet from DEC, i.e. 60cm wide, 180 cm high,
approx 70 cm deep.
Regards,
Ed
----------
http://es.linkedin.com/in/sergiopedraja/en
12:20 p.m.
Hi Ed,
how much rust if any? feet? Overall condition? I have some rusty racks. So could probably
use a nice
and clean one. Would be a pity to send it to scrap.
Best wishes,
Philipp
--
http://www.hachti.de
12:40 p.m.
On Sun, May 30, 2010 at 09:20:39PM +0200, Philipp Hachtmann wrote:
Hi Ed,
how much rust if any? feet? Overall condition? I have some rusty
racks. So could probably use a nice and clean one. Would be a pity
to send it to scrap.
They seem to rust easily. I touched mine up with a grinder and some paint :)
/P
1:26 p.m.
Hello Philipp,
This rack has minimal rust. Ir was in the container, and
I did cleanup a bit here and there. Now I'm finally able to
get to the back and see the tu-55 again.
But the rack has been spoken for, so it wil not go to the scrapper.
Regards,
Ed
Hi Ed,
how much rust if any? feet? Overall condition? I have some rusty racks. So
could probably use a nice
and clean one. Would be a pity to send it to scrap.
Best wishes,
Philipp
--
http://www.hachti.de
--
Dit is een HTML vrije email / This is an HTML free email.
31 May
31 May
1:40 p.m.
But the rack has been spoken for, so it wil not go to
the scrapper.
So I don't have to take the trip to save it :-)
--
http://www.hachti.de
30 May
30 May
1:10 p.m.
From: "Pontus Pihlgren" <pontus at Update.UU.SE>
Sent: Sunday, May 30, 2010 9:40 PM
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Cc: <General at Update.UU.SE>; <"Discussion:"@Update.UU.SE>
Subject: Re: H960 rack available
On Sun, May 30, 2010 at 09:20:39PM +0200, Philipp
Hachtmann wrote:
That is not my experience with H960 racks.
More than 10 years ago, I picked up an H960 rack which was outside
during August-November, well over 3 months during autumn season.
And autumn in The Netherlands has a lot of rain days ...
I still have that rack, and it does not have a spot of rust! Only the
casters
are not always rolling in the direction I'd like. Probably some sand got
in the bearings while being outside between tall grass.
- Henk.
Hi Ed,
how much rust if any? feet? Overall condition? I have some rusty
racks. So could probably use a nice and clean one. Would be a pity
to send it to scrap.
They seem to rust easily. I touched mine up with a grinder and some paint
:)
/P 
9 Jan
9 Jan
4:35 p.m.
New subject: H960 rack wanted
I am looking for a DEC H960 rack in the US. Any condition.
Todd Paisley
7:06 p.m.
New subject: H960 rack wanted
Todd Paisley wrote:
I am looking for a DEC H960 rack in the US. Any
condition.
If you're serious about "any condition", I've got two that you can have
free. They were in a fire, so you might want to sand and repaint them.
Pick up on the San Francisco peninsula, or make arrangements for shipping.
If you don't want those, I have some others that weren't in a fire, that
I'd be willing to sell or trade.
If you want side panels or the plastic things that go between adjacent
racks when you bolt them together, I can sell or trade some of those too.
All of the racks, fire or not, tend to have bad casters, and may have
broken or missing levellers.
Eric
4861
days inactive
5086
days old
10 comments
7 participants
participants (7)
-
eric＠brouhaha.com -
hachti＠hachti.de -
henk.gooijen＠hotmail.com -
paisley＠erols.com -
pontus＠Update.UU.SE -
quapla＠xs4all.nl -
spedraja＠ono.com