Can you take a picture of the side you have ? I have a few On Dec 1, 2016 11:27 AM, "Josh Dersch" <derschjo at gmail.com> wrote: Hey all -- Due to a small miracle I now have 8KW of perfectly functioning core in my long-ill Imlac PDS-1D. The last hurdle is devising a replacement for the missing display (an X/Y vector display). For the time being I'm going to attempt to use an oscilloscope, but first I need to build a cable. The Imlac uses a Winchester connector (14 position) for the display and while they're not as common these days the parts can still be found so I thought I was in the clear, but what I failed to notice is that three of the "pins" (for the X, Y and Blank signals) are actually tiny coaxial connectors that fit within the Winchester housing (i.e. they're the same diameter as a Winchester pin). I haven't been able to track these connectors down anywhere. Anyone have any ideas? Failing that, I can always just tap into the backplane to pick up these signals and ignore the connector on the bulkhead, but it would be nice to be able to use the original connector... - Josh