10 Dec
2006
10 Dec
'06
6:56 p.m.
I'm looking for the schematics from the maintenance
manual for the
Tektronix 4010. There are the chapters 1 to 6 on pdp8.net but the
important chapter 7 is missing.
Yet another project not completed. I have stuck the raw scans of
that section in with the rest at ftp://ftp.pdp8.net/misc/4010/ I will try
to clean them up next weekend. I think I found all the files from that
section but if not email me and I will find them.
Before I forgot about it I was debating on the best way to deal with the
foldout pages in that section. The big foldout pages in this manual
frequently had two separate drawings. Would people prefer that they be on
one big pages like the real manual or on two separate pages so viewing
and printing will be easier for people who can't print on the foldout size
paper?
10 Dec
10 Dec
7:42 p.m.
In article <200612110256.kBB2uNS29172 at user-119apiu.biz.mindspring.com>,
djg at pdp8.net writes:
Before I forgot about it I was debating on the best
way to deal with the
foldout pages in that section. The big foldout pages in this manual
frequently had two separate drawings. Would people prefer that they be on
one big pages like the real manual or on two separate pages so viewing
and printing will be easier for people who can't print on the foldout size
paper?
If it were me and the big foldout contained two figures, then I'd be
happier with each figure as its own page in the PDF. I'd go for the
opposite if it were simply one huge honkin' picture/diagram and not
two diagrams laid out on a large page.
--
"The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
<http://www.xmission.com/~legalize/book/download/index.html>
Legalize Adulthood! <http://blogs.xmission.com/legalize/>
11 Dec
11 Dec
3:24 a.m.
On Sun, 10 Dec 2006 djg at pdp8.net wrote:
Yet another project not completed. I have stuck the
raw scans of
that section in with the rest at ftp://ftp.pdp8.net/misc/4010/ I will try
to clean them up next weekend. I think I found all the files from that
section but if not email me and I will find them.
Thank you very much! The quality of your scans is really good.
Before I forgot about it I was debating on the best
way to deal with the
foldout pages in that section. The big foldout pages in this manual
frequently had two separate drawings. Would people prefer that they be on
one big pages like the real manual or on two separate pages so viewing
and printing will be easier for people who can't print on the foldout size
paper?
Good question. I usually prefer one big page so I can print everything on
one A4 sheet (scaled down) or A3 sheet in original size.
Christian
6587
days inactive
6587
days old
2 comments
3 participants
participants (3)
-
cc＠corti-net.de -
djg＠pdp8.net -
legalize＠xmission.com