16 Feb
2006
16 Feb
'06
5:12 p.m.
Any schematic available for the WD 1002-HD0
Need them badly
Jos
24 Feb
24 Feb
6:07 p.m.
Good luck! I think I have every bit of documentation
Kaypro ever produced (including internal-only docs)
and there appears to be NO schematic of the disk controller
board.
If someone can prove me wrong, I could use that
schematic as well . . .
Glen
0/0
j.e. van der Geest wrote:
Any schematic available for the WD 1002-HD0
Need them badly
Jos
25 Feb
25 Feb
12:21 a.m.
Good luck! I think I have every bit of documentation
Kaypro ever produced (including internal-only docs)
and there appears to be NO schematic of the disk controller
board.
How complicated is it? Since you know the pinouts of the external
connectors (don't you?), I would guess you could draw out a schematic in
a few afternnons. Probably take less time to do that that to find an
original....
-tony
1:09 a.m.
New subject: Kaypro 10 Western Digital Hard Disk Controller WD 1002-HD0
On 2/25/2006 at 12:21 AM ard at p850ug1.demon.co.uk wrote:
How complicated is it? Since you know the pinouts of
the external
connectors (don't you?), I would guess you could draw out a schematic in
a few afternnons. Probably take less time to do that that to find an
original....
IIRC, the WD-1002-HD0 is the same controller as the WD-1002-05, except that
it doesn't have the floppy support. I think Herb Johnson sells a manual
for one on his retrotechnology.com site, but I also haven't checked
bitsavers.
Cheers,
Chuck
7:26 p.m.
New subject: Kaypro 10 Western Digital Hard Disk Controller WD
IIRC, the WD-1002-HD0 is the same controller as the
WD-1002-05, except that
it doesn't have the floppy support. I think Herb Johnson sells a manual
for one on his retrotechnology.com site, but I also haven't checked
bitsavers.
Yes, but does that manual contain a schematic? Alas I've discovered that
many computer manuals don't contain such useful information.
-tony
10:32 p.m.
New subject: Kaypro 10 Western Digital Hard Disk Controller WD
On 2/25/2006 at 7:26 PM ard at p850ug1.demon.co.uk wrote:
Yes, but does that manual contain a schematic? Alas
I've discovered that
many computer manuals don't contain such useful information.
Well, Herb's offering the WD OEM manual--such manuals have in the past
offered at least a PCB layout. I'm sure that Herb will confirm what's in
the thing though.
Cheers,
Chuck
6660
days inactive
6669
days old
5 comments
4 participants
participants (4)
-
acme_ent＠bellsouth.net -
ard＠p850ug1.demon.co.uk -
cclist＠sydex.com -
j.e.vandergeest＠zonnet.nl