Marlin, why not try to find a hackerspace in your area, they usually have 3D printers and willing to help. --- ----- Original Message ----- From: <Martin.Hepperle at dlr.de> To: <cctalk at classiccmp.org> Sent: Monday, June 20, 2016 10:20 AM Subject: HP Series-80 computers - PRM-85 board case? ... maybe! Hi, I own PRM-85 boards for my HP-85 and 86 machines. While they are very useful extension modules for these computers, they lack a proper case. I hate to destroy a working interface or memory module just for the case. I read in this list that there are more people interested in such a case. So I designed a replica case for 3D printing, but did not yet try it out. I do not own a 3D printer and the commercial services calculate between $20 to $100 for one shell (upper/lower). This is a bit expensive for some trials, as I expect that the 3D design would need some iterative refinement to obtain a "perfect" case. So: if someone owning a 3D printer and a PRM-85 board is interested in helping me to refine the design by making a test print I could supply the STL files for upper and lower shells. As a "thank-you" I would expect feedback to improve the design. Regards, Martin Martin {.} Hepperle {at} mh-aerotools {dot} de

Am 20.06.16 um 15:20 schrieb Martin.Hepperle at dlr.de: I highly recommend to contact your local hackerspace: https://stratum0.org/wiki/Hauptseite They offer 3D printers for use: https://stratum0.org/wiki/3D-Drucker There you will find several people experienced with 3D printing and willing to help you. -- tsch??, Jochen