Subject: Re: Need DEC BC80J-20 cable From: Brad Parker <brad at heeltoe.com> Date: Fri, 03 Jan 2014 10:22:41 -0500 I think I'm looking for one of these as well. Or maybe someone here can point me to what I really want :-) I have an RL02 driver and an RL02 controller, but I seem to have lost/misplaced the "cabinet kit". I could swear I had one at one point. So, the RL02 drive has a terminator and a nice long round cable which seems to have a 2x.1" header. But I believe I need the cable part which is normally install on the cpu cabinet. My guess is it would cable a shielded ribbon cable with a connector for the board header and the other end would have a metal bracket and something to mate with the nice round cable... Is this even close? -brad Brad, From the controller, there's a shielded flat ribbon cable with a Berg on either end. Next is a Berg->RL02 cable adapter which can mount in a distribution panel. Not sure what the RL02 connector is, but it's the same as is on back of the RL02. Next, is the nice round RL02 cable with the special twist-lock connectors on either end. Last, of course, is the RL02 with two connectors, one having a terminator if end of chain. - John S.