14 Aug
2019
14 Aug
'19
1:05 a.m.
Recently, I assembled one of the RX02 emulator boards developed by
AK6DN.? I am using it presently in a BA11-M box with PDP-11/2 cpu
(really basic 16 bit system).? I put the disk images from github on the
SD card (RT11 V5.07 and XXDP not sure what version).
The box has a BDV11 bootstrap / terminator board and I use this to boot
the RX02 emulator.? Works fine when I boot RT11, however I can't boot
XXDP - it halts at 000104.
Do I need to use a different version of XXDP to run on the PDP-11/03?
Doug
14 Aug
14 Aug
5:57 a.m.
There are two versions of XXDP+ V2 monitors.?? The XXDPSM.SYS is needed
for cpu's w/o MMU's or don't have more than 28KW.? This and XXDPXM.SYS
are both on the AK6DN diagnostic image. However, only a few other
programs exist on the image.
In SIMH the AK6DN image does the same thing.? The halt location 100 is
near the LTC vector.? I turned BEVENT off and it boots successfully.
I am not immediately sure why this is necessary.
sim> show cpu
CPU??? 11/03, NOEIS, NOFIS, BEVENT disabled, autoconfiguration enabled,
idle disabled
??? 56KB
sim> show ry
RY??? address=17777170-17777173, vector=264, BR5, 2 units
? RY0??? 512KB, attached to XXDP.RX2, write enabled
??? double density
? RY1??? 512KB, not attached, write enabled
??? double density
sim> boot ry
MEMORY MANAGEMENT UNIT NOT FOUND
BOOTING UP XXDP-SM SMALL MONITOR
XXDP-SM SMALL MONITOR - XXDP V2.6
REVISION: E0
BOOTED FROM DY0
28KW OF MEMORY
NON-UNIBUS SYSTEM
RESTART ADDRESS: 152010
TYPE "H" FOR HELP
.H
? NOT FOUND: HELP? .TXT
From a XXDPXM boot.....
.DIR
ENTRY# FILNAM.EXT??????? DATE????????? LENGTH? START?? VERSION
??? 1? XXDPXM.SYS?????? 1-MAR-89???????? 39??? 000067?? F.0
??? 2? XXDPSM.SYS?????? 1-MAR-89???????? 29??? 000136?? E.0
??? 3? DRSXM .SYS?????? 1-MAR-89???????? 48??? 000173?? C.0
??? 4? DRSSM .SYS?????? 1-MAR-89???????? 24??? 000253?? G.2
??? 5? DIR?? .SYS?????? 1-MAR-89????????? 7??? 000303?? D.0
??? 6? DB??? .SYS?????? 1-MAR-89????????? 2??? 000312?? C.0
??? 7? DD??? .SYS?????? 1-MAR-89????????? 3??? 000314?? D.0
??? 8? DL??? .SYS?????? 1-MAR-89????????? 4??? 000317?? D.0
??? 9? DM??? .SYS?????? 1-MAR-89????????? 4??? 000323?? C.0
?? 10? DR??? .SYS?????? 1-MAR-89????????? 3??? 000327?? C.0
?? 11? DU??? .SYS?????? 1-MAR-89????????? 4??? 000332?? E.0
?? 12? DY??? .SYS?????? 1-MAR-89????????? 3??? 000336?? D.0
?? 13? LP??? .SYS?????? 1-MAR-89????????? 1??? 000341?? B.0
?? 14? MM??? .SYS?????? 1-MAR-89????????? 3??? 000342?? C.0
?? 15? MS??? .SYS?????? 1-MAR-89????????? 4??? 000345?? C.0
?? 16? MU??? .SYS?????? 1-MAR-89????????? 4??? 000351?? E.0
?? 17? DATE? .SYS?????? 1-MAR-89????????? 2??? 000355?? B.0
?? 18? DUSZ? .SYS?????? 1-MAR-89????????? 2??? 000357?? C.0
?? 19? ZRXAF0.BIC?????? 1-MAR-89???????? 17??? 000361
?? 20? ZRXBF0.BIC?????? 1-MAR-89???????? 16??? 000402
?? 21? ZRXCA0.BIN?????? 1-MAR-89????????? 7??? 000422
?? 22? ZRXDC0.BIC?????? 1-MAR-89???????? 30??? 000431
?? 23? ZRXEA2.BIC?????? 1-MAR-89???????? 17??? 000467
?? 24? ZRXFB0.BIC?????? 1-MAR-89???????? 31??? 000510
FREE BLOCKS:?? 629
?? Jerry
On 8/13/19 8:05 PM, Douglas Taylor via cctalk wrote:
Recently, I assembled one of the RX02 emulator boards
developed by
AK6DN. I am using it presently in a BA11-M box with PDP-11/2 cpu
(really basic 16 bit system).? I put the disk images from github on
the SD card (RT11 V5.07 and XXDP not sure what version).
The box has a BDV11 bootstrap / terminator board and I use this to
boot the RX02 emulator.? Works fine when I boot RT11, however I can't
boot XXDP - it halts at 000104.
Do I need to use a different version of XXDP to run on the PDP-11/03?
Doug
10:41 a.m.
That sounds like it is trapping due to an LTC interrupt. Turn off the LTC
cheers,
Nigel
On 13/08/2019 21:05, Douglas Taylor via cctalk wrote:
Recently, I assembled one of the RX02 emulator boards
developed by
AK6DN.? I am using it presently in a BA11-M box with PDP-11/2 cpu
(really basic 16 bit system).? I put the disk images from github on
the SD card (RT11 V5.07 and XXDP not sure what version).
The box has a BDV11 bootstrap / terminator board and I use this to
boot the RX02 emulator.? Works fine when I boot RT11, however I can't
boot XXDP - it halts at 000104.
Do I need to use a different version of XXDP to run on the PDP-11/03?
Doug
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it
will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this message
1938
days inactive
1938
days old
2 comments
3 participants
participants (3)
-
dj.taylor4＠comcast.net -
jsw＠ieee.org -
nw.johnson＠ieee.org