18 Mar
2013
18 Mar
'13
1:36 p.m.
OK, I've got an HP X-Y display with the older power cord connector,
where the three pins are round instead of two being blades and the
only the ground pin being round. The entire plug socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try
googling "power coord connector" sometime and see if you can find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in identifying
the exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember
to take a picture with my phone on Wednesday when I am down at the
museum, if we can't figure it out by then.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://computergraphicsmuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>
18 Mar
18 Mar
1:49 p.m.
On Mon, Mar 18, 2013 at 1:36 PM, Richard <legalize at xmission.com> wrote:
OK, I've got an HP X-Y display with the older
power cord connector,
where the three pins are round instead of two being blades and the
only the ground pin being round. The entire plug socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try
googling "power coord connector" sometime and see if you can find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in identifying
the exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember
to take a picture with my phone on Wednesday when I am down at the
museum, if we can't figure it out by then.
Maybe one of these as shown on Brent's page here:
http://www.cs.ubc.ca/~hilpert/e/powerConn/index.html#163
Belden 17952 or 17280, depending on polarization.
1:54 p.m.
Naturally right after sending the message, I think I found a picture of it.
<http://www.skycraftsurplus.com/cordpower1836ftovalhp.aspx>
Notice that they are out of stock on these, but this looks exactly
like what I need.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://computergraphicsmuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>
3:25 p.m.
On Mon, 18 Mar 2013, Richard wrote:
Naturally right after sending the message, I think I
found a picture of it.
<http://www.skycraftsurplus.com/cordpower1836ftovalhp.aspx>
Notice that they are out of stock on these, but this looks exactly
like what I need.
Like this?:
http://www.ebay.com/itm/181095159193
Those were the "standard" removable power cords before IEC
1:55 p.m.
On 2013 Mar 18, at 1:36 PM, Richard wrote:
OK, I've got an HP X-Y display with the older
power cord connector,
where the three pins are round instead of two being blades and the
only the ground pin being round. The entire plug socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try
googling "power coord connector" sometime and see if you can find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in identifying
the exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember
to take a picture with my phone on Wednesday when I am down at the
museum, if we can't figure it out by then.
http://www.cs.ubc.ca/~hilpert/e/powerConn/index.html
Sometimes you can replace the chassis inlet, but if you really want a
cordset, bottom of page:
http://www.sphere.bc.ca/test/wallwarts.html
1:59 p.m.
On 03/18/2013 01:36 PM, Richard wrote:
OK, I've got an HP X-Y display with the older
power cord connector,
where the three pins are round instead of two being blades and the
only the ground pin being round. The entire plug socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try
googling "power coord connector" sometime and see if you can find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in identifying
the exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember
to take a picture with my phone on Wednesday when I am down at the
museum, if we can't figure it out by then.
Videx used to make them, but hasn't in some time. However, they're
still be sold as rara aves and command good prices:
http://www.sphere.bc.ca/test/hp1.html
(I'm sure there are other sellers--this just popped to the top of my
bookmarks)
But be careful--I understand that there exist varieties with the "hot"
and "neutral" sides of the line swapped.
--Chuck
2:08 p.m.
--- On Mon, 3/18/13, Richard <legalize at xmission.com> wrote:
From: Richard <legalize at xmission.com>
Subject: Needed: older connector power cord
To: cctalk at classiccmp.org
Date: Monday, March 18, 2013, 1:36 PM
OK, I've got an HP X-Y display with
the older power cord connector,
where the three pins are round instead of two being blades
and the
only the ground pin being round.? The entire plug
socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but
you try
googling "power coord connector" sometime and see if you can
find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in
identifying
the exact standard/specification for this kind of
connector.
I'm looking for cords that fit the connector.? I will
try to remember
to take a picture with my phone on Wednesday when I am down
at the
museum, if we can't figure it out by then.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
? ???The Computer Graphics Museum <http://computergraphicsmuseum.org>
? ? ? ???The Terminals Wiki
<http://terminals.classiccmp.org>
? Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>
If you search ebay for 'oval power cord' you will find many for sale.
Never cheap though.
Bob
2:16 p.m.
https://en.wikipedia.org/wiki/AC_power_plugs_and_sockets
lots of pics of the various types here
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
On Behalf Of Richard
Sent: Monday, March 18, 2013 3:37 PM
To: cctalk at classiccmp.org
Subject: Needed: older connector power cord
OK, I've got an HP X-Y display with the older power cord connector, where
the three pins are round instead of two being blades and the only the ground
pin being round. The entire plug socket is also rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try googling
"power coord connector" sometime and see if you can find the older oddball
you're looking for...
Hopefully my description alone is enough to aid someone in identifying the
exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember to
take a picture with my phone on Wednesday when I am down at the museum, if
we can't figure it out by then.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://computergraphicsmuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 2641/6185 - Release Date: 03/17/13
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 2641/6185 - Release Date: 03/17/13
19 Mar
19 Mar
2:30 a.m.
In article <00f301ce241d$daf4a240$90dde6c0$@com>,
"Cindy Croxton Electronics Plus" <sales at elecplus.com> writes:
https://en.wikipedia.org/wiki/AC_power_plugs_and_sockets
lots of pics of the various types here
Yep, looked there before, but they don't have a picture of this type
of HP cord.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://computergraphicsmuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>
2:38 a.m.
Thanks to all who responded, I think I've tracked down a reasonably
priced source for some cords.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://computergraphicsmuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>
18 Mar
18 Mar
2:16 p.m.
perhaps like the one in this auction for a Wurlitzer?
http://www.ebay.com/itm/121072536510
thanks
Jim
On 3/18/2013 1:36 PM, Richard wrote:
OK, I've got an HP X-Y display with the older
power cord connector,
where the three pins are round instead of two being blades and the
only the ground pin being round. The entire plug socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try
googling "power coord connector" sometime and see if you can find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in identifying
the exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember
to take a picture with my phone on Wednesday when I am down at the
museum, if we can't figure it out by then.
4 Apr
4 Apr
2:15 p.m.
On Mar 18, 2013, at 5:16 PM, jim s <jwsmail at jwsss.com> wrote:
perhaps like the one in this auction for a Wurlitzer?
http://www.ebay.com/itm/121072536510
Hm, my Wurlitzer just has the power cord hardwired in. If I
were any good at woodworking, I would have replaced it with
an IEC receptacle long ago.
- Dave
18 Mar
18 Mar
2:18 p.m.
perhaps like the one in this auction for a Wurlitzer?
http://www.ebay.com/itm/121072536510
thanks
Jim
On 3/18/2013 1:36 PM, Richard wrote:
OK, I've got an HP X-Y display with the older
power cord connector,
where the three pins are round instead of two being blades and the
only the ground pin being round. The entire plug socket is also
rounded instead of angled.
I've tried to find a relevant picture on the interwebs, but you try
googling "power coord connector" sometime and see if you can find the
older oddball you're looking for...
Hopefully my description alone is enough to aid someone in identifying
the exact standard/specification for this kind of connector.
I'm looking for cords that fit the connector. I will try to remember
to take a picture with my phone on Wednesday when I am down at the
museum, if we can't figure it out by then.
7:12 p.m.
On 03/18/2013 02:18 PM, Jim Stephens wrote:
perhaps like the one in this auction for a Wurlitzer?
http://www.ebay.com/itm/121072536510
Korg and Celestron stuff took these, so searches such as "Korg power
cord" may turn up other sellers than the one I linked to.
I have an old Four-Phase monitor that takes this cord as well.
--Chuck
4279
days inactive
4296
days old
13 comments
10 participants
participants (10)
-
bobalan＠sbcglobal.net -
cclist＠sydex.com -
cisin＠xenosoft.com -
fraveydank＠gmail.com -
glen.slick＠gmail.com -
hilpert＠cs.ubc.ca -
jws＠jwsss.com -
jwsmail＠jwsss.com -
legalize＠xmission.com -
sales＠elecplus.com