29 Nov
2000
29 Nov
'00
12:09 p.m.
On Nov 29, 14:30, healyzh(a)aracnet.com wrote:
PDP-11?
Just about anything that will run RT11, as far as I remember. An 11/03 and
a pair of RX02s should do fine. I used to run it on an 11/23.
--
Pete Peter Turnbull
Network Manager
Dept. of Computer Science
University of York
> UCSD p-System was also available for
PDP-11's, BBC Micros, Sage II, and
> quite a few other machines. I've got versions for all of those.
Doesn't
UCSD still
have a web page about it?
Out of curiousity, what are the hardware requirements to run it on a 
29 Nov
29 Nov
12:33 p.m.
Out of
curiousity, what are the hardware requirements to run it on a
PDP-11?
Just about anything that will run RT11, as far as I remember. An 11/03 and
a pair of RX02s should do fine. I used to run it on an 11/23.
Pete Peter Turnbull 
30 Nov
30 Nov
2:09 a.m.
New subject: tms9914 ieee488 controller
Hi all,
anybody here knows, if there is any replacement for this
texas ieee488 controller, and is still in production ?
Thanks,
emanuel
4:57 a.m.
New subject: tms9914 ieee488 controller
A non-text attachment was scrubbed...
Name: not available
Type: text
Size: 590 bytes
Desc: not available
Url :
http://www.classiccmp.org/pipermail/cctalk/attachments/20001130/faa93c90/at…
6:13 a.m.
New subject: tms9914 ieee488 controller
AFAIK, there are no direct equivalents to the 9914.
There are other GPIB
interface chips (NEC 7210, Intel 8291/8292, Motorola 68488 (gosh, I wonder
how they thought of that number :-)), but they don't have the same pinout
or programming details.
The NEC7210 was discontinued several years ago; I had a
product which used them (a quad IEEE-488 board for VAXBI)
and it was the deathknell for that product.
I think National Instruments makes a pin-compatible
replacement for the 7210. It wasn't there in time to
save my product (which was just as well; it didn't
sell well enough to really pay for itself, although
I was informed that it did eventually pay for its
own development costs).
--
Roger Ivie
rivie(a)teraglobal.com
Not speaking for TeraGlobal Communications Corporation
1:59 p.m.
healyzh(a)aracnet.com wrote:
Out of curiousity, what are the hardware requirements
to run it on a
PDP-11?
Just about anything that will run RT11, as far as I remember. An 11/03
and
a pair of RX02s should do fine. I used to run it on an 11/23.
Pete Peter Turnbull
8554
days inactive
8555
days old
5 comments
6 participants
participants (6)
-
ard＠p850ug1.demon.co.uk -
emu＠ecubics.com -
healyzh＠aracnet.com -
jhfine＠idirect.com -
pete＠dunnington.u-net.com -
rivie＠teraglobal.com