PDP-11 SMD drive cabling

Season's Greetings, Well, today, I finally removed my CDC 9" SMD disk drive from the living room; getting it down the basement steps was fun. Anyway, now it's only a few feet away from my 11/73 and 11/44. The 11/73, running RT-11 and RSX-11, already has two, much smaller, 8" Fujitsu SMD drives in it. Now then, I've got an RL02 pack labeled RSX-11M, which I'm hoping contains a complete RSX-11M distribution. If I can get an RL02 controller board for the 11/73, will there be any problem with just connecting one of the SMD cables to the CDC drive and copying RSX-11M onto it? Should I be able to boot this from any PDP-11? One note: this CDC drive appears to be configured for drive select 1, not 0... does anyone know where I can get one of those little square buttons used to select drive 0? When I get the intermittent CPU problem on the 11/44 fixed, and find a UNIBUS SMD controller, can I just attach the CDC drive to the 11/44 and have it boot and go, or will I need to reconfigure something? Thanks for any info. that anyone can provide about this! -- Copyright (C) 2000 R. D. Davis "The best way to gain a true understanding of All Rights Reserved Wile E. Coyote on the Roadrunner cartoons is to rdd(a)perqlogic.com 410-744-4900 fly, head-first, off a horse into something like http://www.perqlogic.com/rdd a fence or a tree; trust me, this works." --RDD