Bringing up a PDP-8e

Hi folks, This is my first vintage computing project. I have a PDP-8/e with the following boards in this order. FRONT PANEL M8330 KK8E CPU Timing board (system clock), replaces M833 M8300 \ KK8E CPU Major registers M8310 / KK8E CPU Major register control M837 MC8E Extended Memory and Time Share Control M849 SHIELD CORE1 \ CORE1 / CORE2 \ CORE2 / M8320 KK8E Bus loads Each core pair is 16KW. There are a bunch of other non-DEC boards (ECRM) that I have removed for the time being. You will notice that I have no serial board (yet. I have a line on one). I have cleaned up the machine, removed and clean out the foam, cleaned the card sockets and card edges, tested the power supply. I am ready for the next step. Next, I will put the boards back in and start testing. I am looking for some very simple programs that I can key in from the front panel to do some basic testing. I have found simple programs on the internet but they are all in assembler and I don't yet have the knowledge/tools to convert them to switch-enterable programs. For example, here are some good test programs but not directly enterable on the front panel (or at least I don't know how). http://dustyoldcomputers.com/pdp8/pdp8i/testprogs/index.html Can someone direct me to some simple sequence of switch settings to do some basic testing? Many thanks in advance Eugene W2HX PS. Here is more on the machine as received: http://w2hx.com/x/VintageComp/PDP-8e/ Also as you will find on the internet, the ECRM boards are from a company that produced electronic character recognition systems.