PDP-11/10 repair started

========= Sorry for the delayed answer, I don't have email available at work -:/ I have one M930 in slot 3 position A-B, because that is the termination for the processor. I am pretty sure (not 100%) that I also have an M930 in slot 9 position A-B. To be complete, this is the current state. slot 1 A-F : M7260 slot 2 A-F : M7261 slot 3 A-B : M930 C-D : G7273 slot 4 A-B : M9970 C-D : G7273 slot 5 C-D : G7273 slot 6 empty slot 7 empty slot 8 empty slot 9 A-B : M930 Slot 6-7-8-9 is for core memory, respectively G235, H217D, G114, M8293. The documentation says that a G727 should go in slot 3-4-5 position D. I hate those "knuckle-busters". Plus, I am lazy to check NPR continuity on the backplane, so I installed G7273s instead of G727s. Always good. I totally forgot that the GT40 is based on the 11/05. Great tip in case it turns out that I have a "different" CPU module! You never know ...