31 Jul
2000
31 Jul
'00
2:10 a.m.
> > Has anyone ever seen a splicing jig and tape
(or any other form of
repair
> > kit) for the tape cassettes (HP82176??) used
in the HP82161 tape
drive.
> > I'm trying to read some old tapes and
the magnetic tape on one of them
> > has come unstuck from the leader. I think it would be possible to
stick
them together again.
How wide is the tape? If it's not too narrow, you could try 1/2" audio the ends of the tape. I held them against the tape in
a random
compact cassette [1] and they seem to be the same width. Which means I
can use a cassette tape splicing block and tape. I know I have one of
those _somewhere_, but even if I can't find it, I don't think they're
particularly hard to get... I've not tried it yet, but it's
well worth a try.
I'm a little surprised that some digital casettes were manufactured
using the sonic-welding technique, instead of using screws to hold
together the shell halves. FWIW, they do make digital cassette with
screw assemblies.
And yes, as you've discovered, digital cassette tape is the same width
as audio casette tape. The differences are in the oxide formulation.
Digital casette tape needs little in the way of frequency response,
and the response curve should be as flat as possible, whereas (IIRC)
audio casette tape tends to bump up the low and high ends.
Also, digital tape needs a very low dropout rate, so they end up
with a more uniform oxide coating. And, I've never seen them use
metal or chromium dioxide for digital cassettes. Lastly, the
substrate needs not to stretch, so long tape lengths are out.
regards,
-dq