MicroVAX 3800 DSSI Issues

>> B/1 DIA0:

I can boot to VAX/VMS 5.4-2, but on startup, I see this message: %DCL-E-OPENIN, error opening DUB0:[RS1R4]RS1LOG.COM; as input -RMS-E-DNR, device not ready, not mounted, or unavailable %DCL-E-OPENIN, error opening DUB0:[ORACLES]ORAUSER.COM; as input -RMS-E-DNR, device not ready, not mounted, or unavailable %DCL-E-OPENIN, error opening DUB0:[ECMS4]LOGIN.COM; as input -RMS-E-DNR, device not ready, not mounted, or unavailable Okay, so DUB0: isn't mounted, I guess. ROHIT1$ show dev Device Device Error Volume Free Trans Mnt Name Status Count Label Blocks Count Cnt R7CY2A$DIA0: Mounted 0 VMS54_2DISK 173289 134 1 ROHIT1$DUB0: Online 0 ROHIT1$DUB1: Online 0 ROHIT1$DUC10: Online 0 Device Device Error Volume Free Trans Mnt Name Status Count Label Blocks Count Cnt ROHIT1$MUA0: Online 0 Device Device Error Name Status Count FTA0: Offline 0 OPA0: Online 0 TWA0: Offline 0 Device Device Error Name Status Count IKA0: Offline 0 IMA0: Offline 0 INA0: Offline 0 PTA0: Online 1 PUA0: Online 1 PUB0: Online 2 PUC0: Online 2 PYA0: Offline 0 SJA0: Online 0 SJA1: Online 0 WSA0: Offline 0 XQA0: Online 0 Looks like they're online but not mounted. If I'm reading the help pages correctly, I should just be able to mount it at this point: ROHIT1$ mount dub0: disk0 %MOUNT-F-INCVOLLABEL, incorrect volume label -MOUNT-I-VOLIDENT, label = 'USER01 ', owner = ' ', format = 'DEC FILE11B ' I tried giving it the correct label, but it still didn't seem to mount. Now I wanted to see if the MSCP server is running: ROHIT1$ show device/served MSCP-Served Devices on ROHIT1 1-SEP-2015 10:55:19.39 Queue Requests Device: Status Total Size Current Max Hosts %SHOW-E-MSCPNOTLD, MSCP-Server code not loaded No, it doesn't look like it...so getting back to the >>> prompt, I do a bit more investigation: UQSSP Disk Controller 0 (772150) -DUA0 (RF71) UQSSP Disk Controller 1 (760334) -DUB0 (RA81) -DUB1 (RA81) UQSSP Disk Controller 2 (760340) -DUC10 (RA81) UQSSP Tape Controller 0 (774500) -MUA0 (TK70) Ethernet Adapter 0 (774440) -XQA0 (08-00-2B-17-3F-37) I should be able to get to the PARAMS> prompt now: Starting DUP server... UQSSP Disk Controller 1 (760334) Stopping DUP server... Or not? Why can't I seem to get to the prompt? I can with disk 0: Starting DUP server... UQSSP Disk Controller 0 (772150) Copyright 1988 Digital Equipment Corporation PARAMS> show allclass Parameter Current Default Type Radix --------- ---------------- ---------------- -------- ----- ALLCLASS 0 0 Byte Dec B PARAMS> Can't seem to get to PARAMS> with disk 2 or tape 0 either. Only disk 0 seems to work. Can anyone provide any suggestions? I'd like to see what else is on the system. Pictures here: http://imgur.com/a/WYGra Thanks, Kyle