28 Jan
2010
28 Jan
'10
1 a.m.
On Wed, Jan 27, 2010 at 6:42 PM, Jim Brain <brain at jbrain.com> wrote:
On 1/27/2010 5:44 PM, Dan Gahlinger wrote:
Jim Brain should be able to build this in his
sleep ;)
(assuming he's not too busy)
I'm happy to help, but the pic's a bit too
small for me to see the
Done! Although the 500 expansion connector and the zorro slot are
well-documented. Now to just figure out what that little IC is...
specifics. If you can get a good scan, and some
info on the connectors and
the IC on board, that would be helpful.
I noticed it says the passthrough is of limited use
due to the missing
I'm not sure. The amiga hardware database says that use would be limited...
whatever that means. Maybe for ram expansion only? I'll do some reasearch
and get back to you.
Also, some guys from finland (or was it sweeden?) made this:
http://amiga.erkan.se/index.php/internal-amiga-500-ide-hard-drive-controlleā¦
I know the circuit board designs are available, so maybe all the work has
been done. I'll ask around the amiga boards and see how much interest there
is.
brian
Buster IC. Does that imply there's no
practical point in designing the pro
version?