In article <49210F34.4080409 at hawkmountain.net>,
"Curtis H. Wilbar Jr." <rescue at hawkmountain.net> writes:
I have graphics boardset for my R4K Indigo 2 (non
impact)
(FHV1/VB2/RU1/GU1) which includes the Galileo video board
(FHV1).
I can get a breakout box... but I can't locate a cable ?
This is a common problem for these video breakout boxes for the SGI.
You can check
nekochan.net and ask if someone has a spare. I have a
breakout box of this variety and the cable to go with it, but I'm not
looking to get rid of what I have. Unless someone has one laying
around, the best way I've foung to get these hard-to-find cables is to
simply squat on an ebay search and wait till one becomes available.
You may be forced to buy another breakout box if its sold as a set.
Creating them on your own is a little tricky because of the connectors
and the shielding required for a good signal, but I'm sure it can be
done if you're careful and can obtain the connector.
--
"The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
<http://www.xmission.com/~legalize/book/download/index.html>
Legalize Adulthood! <http://blogs.xmission.com/legalize/>