1 May
2014
1 May
'14
3:39 p.m.
In article <F63BEEDB-995F-40D5-9E77-C53C50E4374A at me.com>,
Steve Algernon <salgernon at me.com> writes:
But when connected to a known good serial cable with a
9600 getty,
I get maybe a little gibberish and no more local echo on keystrokes.
Try having the getty talk to the terminal at lower baud rates, without
changing the switch settings.
In other words, if the switches are unreliable, start at 300 baud and
work your way up supported baud rates until you find the baud rate
that the switches are telling the terminal to use.
--
"The Direct3D Graphics Pipeline" free book
<http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://ComputerGraphicsMuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://LegalizeAdulthood.wordpress.com>