28 Jan
2017
28 Jan
'17
10:34 a.m.
On Sat, Jan 28, 2017 at 03:51:49PM +0100, Mattis Lind wrote:
I am about to get our IBM1627 (rebranded Calcomp 565)
going but the pens in
the case is quite dry. What is the best method to refurbish those? What is
the best solvent to get the old ink out? What ink to refill with?
https://drive.google.com/open?id=0B-rp4vyPPYu1ZjVRbnlyczV4czQ
That looks like the unpressurized ballpoint. I never tried to refill mine.
Another option is making replacements. I found current ballpoint
refills and cut them down. I used a dremmel with cutoff disk. Watch for
splatters. I then stuck something in to remove 1/4" or so of the ink from
the end. Otherwise it will come out in the pen holder and make a mess.
The problem now is almost all refills use a larger diameter tip. I had to
look around some before I found the proper size. I did grind one larger
diameter one down by chucking it in a drill and grinding with the dremel.