29 Apr
2002
29 Apr
'02
10:53 a.m.
I am looking for the console bulkhead pinout and the
DIP switch
description of the M8190 / KDJ11-B PDP11 QBus CPU module. I had a look
at the micronotes and googled around, but found nothing.
I got the following from somewhere with the name 1183.dip (sunsite maybe):
dip switch near handle
1 on disables console terminal (factory use only)
2-4 off off off boot auto according to the dialog mode settings
off off on boot dev. # 1 in dialog mode settings.
off on off " " 2 "
off on on " " 3 "
on off off " " 4 "
on off on " " 5 "
on on off " " 6 "
on on on if sw. 1 off, power up into ODT
if sw. 1 on , run self-test disg. in a cont loop
5 off enters dialog mode on power up
6-8 on on on 38400 baud rate console.
on on off 19200
on off on 9600
on off off 4800
off on on 2400
off on off 1200
off off on 600
off off off 300
All of these s/b turned OFF if you have the console patch panel rotary
switch connected to the cpu.
rotary switch positions definitions.
switch pos.s v v
baud rate auto boot dialog mode
38400 0 8
19200 1 9
9600 2 10
4800 3 11
2400 4 12
1200 5 13
600 6 14
300 7 15
Jochen
-chuck