I got the following from somewhere with the name 1183.dip (sunsite maybe): dip switch near handle 1 on disables console terminal (factory use only) 2-4 off off off boot auto according to the dialog mode settings off off on boot dev. # 1 in dialog mode settings. off on off " " 2 " off on on " " 3 " on off off " " 4 " on off on " " 5 " on on off " " 6 " on on on if sw. 1 off, power up into ODT if sw. 1 on , run self-test disg. in a cont loop 5 off enters dialog mode on power up 6-8 on on on 38400 baud rate console. on on off 19200 on off on 9600 on off off 4800 off on on 2400 off on off 1200 off off on 600 off off off 300 All of these s/b turned OFF if you have the console patch panel rotary switch connected to the cpu. rotary switch positions definitions. switch pos.s v v baud rate auto boot dialog mode 38400 0 8 19200 1 9 9600 2 10 4800 3 11 2400 4 12 1200 5 13 600 6 14 300 7 15 -chuck