7 Apr
2003
7 Apr
'03
7:23 p.m.
--- Charles <charlesmorris(a)direcway.com> wrote:
On Mon, 07 Apr 2003 12:42:27 -0500, you wrote:
>... shows the use of DMCA and DCEA to clear a disk, rather than DEAL.
.
.
.
I guess I'll have to figure out how to clear the
LS191 counters I
used for registers... The simplest way would... require a couple
of chips and there is just no more room (and keep the board "cheap",
standard 160x100mm Eurocard size and two-layer).
SMT? I've done a bit of SO soldering and it's not that hard. A
decent temp-controlled iron and some masking tape or blu-tack to
hold the parts in place so you can tack down the corners.
However you solve it, don't give up. This is a cool idea that
just needs a little tweaking.
-ethan