On Mon, 1 Oct 2012, Stefan Skoglund wrote:
m?n 2012-10-01 klockan 07:04 -0500 skrev
Tothwolf:
Any PII and PIII will support at a minimum 512MB of ram (even the
consumer chipsets), but as long as you have swap, 32MB or 64MB would
probably work. It's when you are running the entire OS from media
such as CompactFlash or SD card where you don't have swap that having
less memory can become a challenge with modern software (no X, gui,
etc). As cheap as second hand SDRAM modules are though, adding more
memory is the easiest solution.
Njaa, my mother's Dell Dimension machine from 1997 only supports 384 M
(3 memory module slots) IF you can get hold of some a bit unusual 128M
memory modules. Dell sold them with 1 or 2 64M modules :-( .
Which chipset does it use? I've run into many boards where the
documentation regarding how much memory the board could support was
wrong. Case in point, some of the AMD based Compaq systems state 384MB
max (3x 128MB) but in fact actually support 1.5GB (3x 512MB). Back in
the days of Slot 1 CPUs, Dell locked some their motherboards to certain
slower models of P2 CPUs with later BIOS revisions, so it is certainly
possible they did something similar with memory.
It is a Intel 440LX chipset (Dell Dimension 333D.)
According to Dell the system only supports up to 128M DIMM.