10 Nov
2018
10 Nov
'18
6:19 a.m.
Ok. Those are quite small. So you have one? Or those are not yours?
If you have one, and a way to accurately measure it, making more will be easy for anyone
with a lathe.
I could do it, but surely you can find a machinist closer to home?
Guy
At 01:03 PM 10/11/2018 +0000, Riesen Thomas wrote:
Guy,
I am looking for small motor pulley ... see pic ...
Regards
Thomas
-----Urspr?ngliche Nachricht-----
Von: Guy Dunphy [mailto:guykd at optusnet.com.au]
Gesendet: Samstag, 10. November 2018 13:25
An: Riesen Thomas <thomas.riesen at predata.ch>; General Discussion: On-Topic and
Off-Topic Posts <cctalk at classiccmp.org>
Betreff: Re: 50Hz Pulley for 8" Floppy Drive Mitshubishi M2894-63B
At 12:03 PM 10/11/2018 +0000, you wrote:
Hi all
Any suggestions where to find two 50Hz-Pulleys for the 8" Floppy drive
Mitsubishi M2894-63B?
If there also the appropriate ribbon gummies available, I would be very
happy.
Regards
Thomas
Do you know what they look like, and the dimensions?
Because I have these. http://everist.org/pics/misc/IMG_1655_pulley_800.jpg
_Maybe_ they were off Mitsubishi drives, not sure. Had them in a box of floppy drive
related bits for a loooong time, and have no recollection of where they came from.
These are 49.0 mm OD, hole 4.7 mm dia. And this is Australia, with 50Hz mains.
Guy
Attachment Converted: "f:\email\attach\Pully_8Zoll_02.jpg"
Attachment Converted: "f:\email\attach\Pully_8Zoll_01.jpg"
