From: cctalk [mailto:cctalk-bounces at classiccmp.org
] On Behalf Of William
Sent: 10 September 2016 02:41
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>;
rob at jarratt.me.uk
Subject: Re: Logic Analyser Advice
On the 1630 series, the active logic is all in the pods. The connectors on the
flywires are proprietary HP parts with a mechanical latch to lock them into the
pods. but I've seen multiple mentions in discussion groups of folks using stock
Molex connectors to connect to the pods.
Some time ago I asked about connectors for the pods on a HP 1630G Logic Analyzer. The
reply above mentioned molex connectors as an alternative. I have been having a bit of a
look around but I don't seem to be able to find anything suitable. Does anyone know
what might be suitable?