2 Apr
2004
2 Apr
'04
11:57 a.m.
"Zane H. Healy" wrote:
Jerome Fine replies:
On the PDP-11 (well actually on the PC since I run RT-11
under E11 so I can say to myself that it is not really Windows).
I agree that it is not worth the effort, but I was just hoping that
it might be possible to confirm that when the load is increased,
the voltage levels are not sufficient. And when I do toss the
power supply, I usually cut off the cables for the hard drives
since they can then be easily converted to "Y" connectors
by adding a female connector to the cut portion.
Seriously, is there an easy way to test a PC power supply
without opening the case?
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.
I could use
some help with what seems to be a BAD power
supply. For the past month, I started to experience more
and more frequent crashes of the system. About 2 weeks
ago, I figured that it seemed to be the power supply and
I started to use an external power supply for the 3 hard
disk drives. That solved the problem and a few days ago,
I replaced the internal power supply so that now the 3 hard
drives are back on the new internal power supply with the
rest of the system (and it is now very quiet again since the
external power supply had a noisy fan!).
Jerome,
Is this on your PC or on your PDP-11? If it was on the PC, just toss
the powersupply. It's not worth the effort.