Building a BA08 for a pdp8/L

So now that my pdp8/L is up and running (it now has a serial port and runs FOCAL69 quite well) I'm thinking about the next step, which is of course more memory. This requires a BA08 or BM8/L or something expansion box but to be honest I have enough spare flip chips and such from the wrecked 8/I to build about 3 core memory systems. So given that the schematics for the BA08 are online, they look pretty darn simple, I have the parts, and I have the parts does anyone know if it's possible to get a flip chip backplane to work on and wire up to emulate a BA08? It looks like they just used the data break interface lines to hook up to the processor. Everything's there, Memory address bus, memory data bus, and the various signals for jumps and the like that could allow one to decode and implement the extra instructions needed. Hm. Might just be easier to build it with an FPGA or something as it's mostly linking up simple gates and the whole core memory section could be removed by a 4k*12 memory array. Anyone ever done this? C