Dave McGuire wrote:
On 07/10/2012 03:35 PM, Holm Tiffe wrote:
This hit broke a 300mil 24pin DIL chip in the inside
that
must be related to the BNC network.
If the 300 uses an AMD LANCE like the 200, it would be an AMD 7992 SIA
The schematics of the 200 are at
http://bitsavers.org/pdf/dec/ethernet/MP01828_DSRVC-A_EngrDrws_Jul86
After replacing the broken Chip trough the 7992 it seems to be working
again:
Wow, nicely done...congrats on the fast repair and good score!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
THX, changing that chip wasn't really a problem.
Now, after the help from you and crimping an adapter the DECserver talks to
me:
Local>
Local -901- Initializing DECserver 300 08-00-2B-29-B0-B1 - ROM BL1.0.6 H/W
2
Local -953- Attempting to locate load host [ISO8802]
Local -955- Host 00-00-92-90-09-8D located [ISO8802]
Local -956- Requesting load from host 00-00-92-90-09-8D
Local -903- Loading from host 00-00-92-90-09-8D
Local -904- Image load complete
Local - Telnet listener failed to bind socket
Local - No internet address - SNMP not enabled
... after an return on the console port:
DECserver 300 Terminal Server V2.2C (BL46-13) - LAT V5.1
(c) Copyright 1996, Digital Equipment Corporation - All Rights Reserved
Please type HELP if you need assistance
Enter username>
Ok, entered holm, what else..
Local>
Normally to cheange the ip address setup you have to rise the privielege:
set priv
Password>
No I can enter a password 3 times before the unit logs me off :-(
I've read that pressing the "Reset" switch while powering up the unit is
setting the factory configuration, but this password question persists.
Does anyone know the factory default user and password to set up that
thing?
Regards,
Holm
--
Technik Service u. Handel Tiffe,
www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741