21 Feb
2012
21 Feb
'12
12:14 a.m.
On 2012-02-20 22:23, Holm Tiffe<holm at freibergnet.de> wrote:
Johnny Billquist wrote:
Way too hard to figure out what the problem is with this information.
Have you checked that the CSR really is correct, for instance?
If the controller firmware itself sees the disks just fine, then the
connection between the controller and the OS is one obvious point to
look at. But there could be a bunch of issues.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
> By the way, yes, there is plenty of SCSI
support in VMS. All of the more
> modern VAXstations and whatnot have only native SCSI, and no MSCP or
> similar.
>
> Johnny
>
> --
Jonny I have had a very similar problem on my experimental KA630 uVAXII
with the Emulex UC07/08 Controllers. I've tried to connect some IBM 4GB
Disk since they where quiet. That hasn't worked at all. The Emulex
Firmware was happy, but neighter the RT11 (with an 11/53 CPU) nor the
VAX could access the two logical disks I've created on that drive.
Must have something todo with the emulex firmware that I have on that
controller.