Mate-n-lok connector for H744 Regulator

See the bottom of: https://gunkies.org/wiki/DEC_standard_modular_regulators I believe that you'll want one or more of these: https://www.connectorpeople.com/Connector/TYCO-AMP-TE_CONNECTIVITY/1/1-48046 0-0 https://www.connectorpeople.com/Connector/TYCO-AMP-TE_CONNECTIVITY/1/1-48045 9-0 Note that both have a minimum order :-<. As for pins: https://www.mouser.com/ProductDetail/TE-Connectivity/60620-1?qs=pn%2Fzyis3Xj HkDeV60Xt%252Btg%3D%3D https://www.mouser.com/ProductDetail/TE-Connectivity-AMP/60619-1?qs=sGAEpiMZ ZMueQxo7L%2FBPyOx7s9t3UY8b -----Original Message----- From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Rob Jarratt via cctalk Sent: Saturday, January 8, 2022 8:27 AM To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org> Subject: Mate-n-lok connector for H744 Regulator To make testing of the H744 a bit easier I would like to try to make up some connectors for the mate-n-lok connector to make it easier to connect power and load. I know the H744 uses a mate-n-lok connector, but there seem to be a lot of different types and I don't seem to be able to find a type that would work. Does anyone know what the correct one is? Thanks Rob