28 Aug
2015
28 Aug
'15
10:22 a.m.
On Fri, 28 Aug 2015, Ali wrote:
Glass blocks UV light. This is why EPROMS were made with quartz windows
even though glass would have been much cheaper. Regular acrylic plastic
will block UV as well, but special types are available that allow
transmission of UV (such as for sun room roof panels and tanning beds).
Keep in mind also that short wave UV-C (such as a germicidal lamp) is
dangerous to work around, which is why devices such as EPROM erasers
generally have a mechanical interlock to disable the lamp when open. UV-A
(blacklight) is much safer, and would probably give about the same results
as having something out in the sun (UV-C is blocked by the atmosphere
while UV-A isn't).
Ah! That
explains my lack of results. I soaked the keys for five or six
hours. They got clean, but didn't change color very much. Sounds like I
pulled them out too soon. Several days, you say?
Has anyone tried a glass/plexi-glass bath w/ UV lights? It might get
expensive if you want UV lights that are dimmable (to control strength)
but UV lights and ballasts are not that expensive. A simple timer and
maybe a reflective surface on the enclosure and you are good to go. Then
real experiments can be done by varying exposure time and concentration
of the solution to see if there is a happy medium. Problem is you need
someone with lots of yellowed parts that they don't mind experimenting
on/ruining in the process.