MicroRSX V1
Partitions - YIK - DU.SYS gets you 8 . SYSGEN more.
I have no MFM drives and loads of SCSI.
How much of a drive gets used - IDC
R
On 24/02/2022 11:19, Chris Zach via cctalk wrote:
What version of MicroRSX?
Remember RT11 has a limit of 33mb disk partitions, might want to just
get 30mb MFM drives and run it off the RQDX3
C
On 2/24/2022 5:13 AM, Rod Smallwood via cctalk wrote:
> I already have a Linux system (Ubuntu v20) the problem is
>
> I have no hardware that would run Linux and has a floppy controller.
>
> However thats no longer a problem as I have obtained a full original
> MicroRSX distribution on RX50.
>
> But thats not the end of the story.? RT-11 is next
>
> R
>
>
> On 24/02/2022 08:35, Liam Proven via cctalk wrote:
>> On Wed, 23 Feb 2022 at 15:50, Paul Koning via cctalk
>> <cctalk at classiccmp.org> wrote:
>>> I think you're unnecessarily limiting your options by refusing to
>>> use Linux, which as we've pointed out is something you can do on
>>> your existing PC without overwriting the OS that is on it now.
>> I agree. The same thought crossed my mind, in fact.
>>
>> A small distro such as Slax ?
https://www.slax.org/ ? would fit onto a
>> single CD-ROM, boot and run entirely from that disk and does not need
>> to touch the hard disk.
>>
>> If the machine has a DVD-ROM, then a larger distro such as PC Linux OS
>> will do the job too. No installation needed.
>>
>>
https://www.pclinuxos.com/
>>