6 Oct
2015
6 Oct
'15
8 p.m.
On 10/6/2015 9:43 PM, Ali wrote:
That's all assuming you can find blades and pads for such a machine.
- J.
Pretty
simple--basically, it draws the tape over a carbide or ceramic
blade and scrapes loose surface oxide off; pads wipe both sides of the
Chuck,
Thanks for the explanation. So then you would use this on tape w/o data or w/ data that
does not need to be retained? I ask because scraping off loose carbide sounds like it may
cause problems with data integrity.
-Ali