18 Aug
2008
18 Aug
'08
4:45 p.m.
Chuck Guzis wrote:
I can pop the pins out of 1/16" PCB using just a
wirewrap bit, but
1/8" OD tubing is *way* too thick to do the job on the 1/8" stock.
I don't understand where the problem is. The ID of the tubing has to be
at least 36 mils to fit a 25 mil square WW tail. The smallest I had on
hand was 1/8" OD, and that fit just fine over the pins. 3/32" OD tubing
might work.