P112 runs RSX-11

On 12/4/18 7:51 AM, Dennis Boone via cctalk wrote: Subject: Re: Interested in a Z280 SBC Posted by hperaza on Thu, 12 Oct 2017 12:44:09 GMT View Forum Message <> Reply to Message lowen wrote on Wed, 11 October 2017 06:44While I personally would like to see a bit more coordination of efforts especially in the area of the C compiler, assembler, and emulator, I know of several efforts by several people already underway. I am very interested in the emulation side of things, and even going as far as a VHDL or verilog core that could be used in an FPGA. With the annoying bugs fixed, of course! Some of the bugs could even be emulated (if they are not of erratic nature, of course). That could be useful in case someone wants to test a program on the FPGA version that is intended to work on the real iron as well. The "compatibility" mode could be controlled by a bit in an additional CPU control register. Which brings up another question: is there any updated list somewhere of the known Z280 bugs? So far the information available is rather fragmented and incomplete. Quote:To all who are involved in doing a compiler, assembler, or emulator: I know you've probably posted before, but I would like to get a list together of all of these efforts and see what coordination might be possible. OK, here is my list: native Z280 (macro)-assembler, preferably M80 or SLR compatible (currently working on that) debugger (e.g. like DDTZ, but using the single-step capabilities of the chip) get UZI280 working (haven't even looked at it yet) and add more utilities, etc. same for Fuzix port of MP/M better hard disk support (e.g. via FDISK utility like the one for the P112, with automatic recognition of partitions in CP/M and UZI so one will not have to change the BIOS every time partitions change) better ROM setup? again taking the P112 as an example (i.e. adding disk timing parameters to the NV RAM, if possible add a simple embedded debugger?) a Verilog or VHDL Z280 core, perhaps taking T80 as the base. And if I really get the time, would like to make something like this, so it could be plugged directly into the CPU280 CPU socket. and like Lamar I also have my own, other niche project - a port of a multitasking, RSX-11M-like OS I wrote many years ago for the Z80 (now ported to the Z180). The PDP-11 always was my favorite machine, and the Z280 has many PDP-ish features, including a similar MMU, so for me is an interesting hobby project.