3 Oct
2003
3 Oct
'03
11:19 p.m.
On 2003.10.04 01:04 Fred N. van Kempen wrote:
Looking for the cab kits for the DLV11J (4-port
serial) cards,
Cable, connectors, soldering Iron?
Here is the pinout:
Pin
1 UART Clk (in or out)
2 Signal ground
3 Transmit Data +
4 Transmit Data -
5 Signal Ground
6 INDEX (no pin)
7 Receive Data -
8 Receive Data +
9 Signal Ground
10 +12V through fuse when using -KA (current loop)
Connect pins 8, 3, and 2 for your standard 3 wire RS-232 cable.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/