DEC InfoServer ?

Specifically: Does anybody have the pinout to the db25 (not a db 15!) plug of the infoserver 150 model SEACD - AX - A01 in the back? The caption above the plug shows a square with an up-arrow in it. Monitor? Combo kbd/mouse/monitor? And the S1 switch nearby that switches regular vs3100's between serial and terminal console mode. Does that mean it has a built-in framebuffer for at least b/w like all vs3100's and can serve as a console? There are three mmj plugs in the back, named 1,2 and 3 with horiz arrows to left and right: why three serial consoles? All simultaneous? And two scsi terminators. Two scsi buses? So where does the kbd go??? Then it has this bulging cover that hides the MAC address of the serial interface. Otherwise the box looks just like a vs3100 to me, so it should run netbsd1.6. BTW for those who play with it: Ping works on a vs3100m38, although it does not return the pkt count to console, so it looks broken....hate dead dinosaurs! Try telnet instead and bingo! Fred -----Original Message----- From: cctalk-admin(a)classiccmp.org [mailto:cctalk-admin@classiccmp.org] On Behalf Of Fred N. van Kempen Sent: Friday, 07 February, 2003 12.09 To: cctalk(a)classiccmp.org Subject: DEC InfoServer ? All, is anyone here familiar with installing and operating Info Servers? I got word that they are pretty much the same as a stripped-down MV3100, so installing the InfoServer CD on such a machine (equipped with CD drive) should get us the desired result... Pse contact me off-list if you can help, and I'll summarize here, later. Thx, Fred