25 Jun
2020
25 Jun
'20
4:42 p.m.
You'll look for pins on the board to instruct the drives which will be
reading and which will be writing. That is my guess.
Both need to work and have empty space. Probably the machine booted
directly from some type of PXE, but maybe not. This gives you a hint:
https://w2hx.com/x/SAIC%20V2LC/20200124_094105.jpg
It must power up, that is a good sign.
Good luck.
On Thu, Jun 25, 2020 at 4:13 PM Jon Elson via cctech <cctech at classiccmp.org>
wrote:
On 06/25/2020 05:29 PM, W2HX via cctech wrote:
Temperature sensor and heater. Undoubtedly for start-up in
extreme cold conditions.
Jon
Does ANYONE have any idea what these 4 wires are
connected to and why?
And anyone give any odds about whether these 4 wires will
prevent this
IDE-SD converter from working?