28 Jan
2010
28 Jan
'10
4:18 a.m.
On Wed, Jan 27, 2010 at 6:42 PM, Jim Brain <brain at jbrain.com> wrote:
On 1/27/2010 5:44 PM, Dan Gahlinger wrote:
A bit more info... apparently the card edge connector for the amiga 500 is
the same as the CPU slot on an amiga 2000. There are 1000s of amiga 2000
boards out there with acid damage from leaky batteries. They're not
right-angle connectors though, so I'm not sure how well that would work.
There are 1000s of scsi controllers out there for the 2000, many with ram on
them that would be cheap and plentiful that could plug right into this.
brian
Jim Brain should be able to build this in his
sleep ;)
(assuming he's not too busy)
I'm happy to help, but the pic's a bit too small for me to see the
specifics. If you can get a good scan, and some info on the connectors and
the IC on board, that would be helpful.
I noticed it says the passthrough is of limited use due to the missing
Buster IC. Does that imply there's no practical point in designing the pro
version?