2 Feb
2018
2 Feb
'18
7:29 p.m.
On 2/1/2018 12:55 PM, Douglas Taylor via cctech wrote:
I'm getting an Alphaserver 1000a and wanted to
install VMS 8.4 -
hobbyist license from CD.
So, I went to the folder on my PC where I have the 8.4 hobbyist
distribution.? There are 3 ISO files; ALPHA084, ALPHA084LP1 and
ALPHA084LP2.
I thought I would burn these to CD and up and away.? However, Windows
7 balks and says, 'The selected disc image file isn't valid'.
Is it Windows 7 or is there something I'm missing?? Is the CD on the
Alphaserver 2048 byte block size or 512?
Doug
An update to this.
I picked up the Alphaserver today, powered up fine.? I reset the system
password so I could log in.
It is running OpenVMS 7.1 and has 7 disks in the Storageworks box.
When I log in only the boot disk shows up from the $ show dev command.?
Nothing else, no CD, no tape which are all there.
On powerup it shows:
bus 2 slot 0 pka Qlogic ISP10x0
bus 2 slot 1 ewa DecChip 21040-AA
bus 2 slot 2 pua DEC KFPSA
bus 0 slot 11 dra Mylex DAC960
bus 0 slot 12 drb Mylex DAC960
bus 3 slot 0 pkb Qlogic ISP10x0
I think 4 of the storageworks disks are in a Raid in the storageworks
(DRB).? The DRA raid must have been external since on startup it spends
time waiting for it and finally gives up.
In console mode:
>> show dev
DKA400 RRD45
DKB400 RZ28
DKB500 RZ29
DKB600 RZ29
DRA0 4 member RAID 5
DRA1 1 member JBOD
DRB0 4 member RAID 5
DVA0
MKA500 TLZ07
EWA0??? mac address
PKA0 SCSI bus
PKB0 SCSI bus
PIA0 DSSI Bus ID 3
My desire is to setup this machine and use it, however, I don't want to
undo things I can't put back together again.? Any thoughts or advice?
Doug