In article <AANLkTikv8B8XSBquZF2Yt89izaETQTk9iLab1=6_rKzL at mail.gmail.com>,
Brian Lanning <brianlanning at gmail.com> writes:
I picked up an interesting bit of hardware on ebay.
It's one of these
without components:
http://www.amiga-hardware.com/showhardware.cgi?HARDID=1360
Does anyone have a way of getting at a component list for this?
I would ask on Amiga forums for someone who already has one of these
to make you a parts list.
FWIW, on the terminator board I'm guessing that the upper left 7
components are pull-up resistor packs to bring bus lines high and the
capacitors are decoupling capacitors for some of the signal lines.
Power and ground, maybe?
The chips on the main board are another matter, but I would guess
either slot address decode logic or bus drivers.
Maybe you can infer what needs to go there by the tracing the metal
runs on the board and referring to a schematic for the Amiga bus.
--
"The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
<http://legalizeadulthood.wordpress.com/the-direct3d-graphics-pipeline/>
Legalize Adulthood! <http://legalizeadulthood.wordpress.com>