Collections of (physically) large computers

I am not sure, but from some pictures I have seen, he has a LOT of stuff for his two IBM 709s. And then there is the 7094 system. And the S/370 system. Each system may take up 500 square feet. For that matter, if I were to get all the stuff together for my Hitachi AS/6 (A Japanese 3032 clone), it would probably not fit in 500 square feet either. The processor is 21 feet long by three feet wide, and does not contain any RAM or the channel I/O hardware. The six spindle 3330 DASD string is 15 feet long by 4 feet wide. Then the three tapes with controller is another 12 by 3 feet, then the card reader and punch take up two more three by six footprints, then the network box, then the 1403N printer, then the comm controller at five by four, then the other comm controller at 3 by 3, then some more junk I could hang off it if I wanted to. When you add this all up, then figure in the space needed to open the doors and gates for servicing - well, it is a large plot of land. I think Sridhar is in the same boat. For that matter. that 4381 system that sold on Ebay six months or so back would also fits (and sinks) in that boat, having a couple good DASD strings. Pictures please! I am actually trying to buy a building so I can get all this junk in one place. -- Will