29 Nov
1998
29 Nov
'98
6:34 a.m.
On Sun, 29 Nov 1998, Tony Duell wrote:
If you pick the right ground point you'll probably
be OK - machines are
designed to withstand a CRT flashover to the CRT ground point. But I
don't think that deliberately testing this is a good idea.
On one of the Kaypro's, there's a pin sticking up marked "ground",
right
next to the flyback trans. Would this be there specifically for
discharging the CRT via the screwdriver-under-the-suction-cup method?